keo dán loctite 425-20gr, loctite 425-20gr

425 Assure is a fast curing, low strength cyanoacrylate adhesive; it has a low viscosity, can be applied either pre- or post-assembly; it can be used with an activator, but may reduce bond performance. 20 gram bottle.

Keo 425, keo dán 425, keo dán loctite 425, loctite 425

Typical Use:

Used for locking plastic and metal fasteners; recommended for metal, nylon, polyester and many thermoplastic materials.
Product Name: LOCTITE® 425™ Assure™ Instant Adhesive Surface Curing Threadlocker 20gr
Color/Appearance:Blue	1 Or 2 Part: 1,2
Mix Ratio:Wipe On	Base Chemistry: Cyanoacrylate
Viscosity Cp: 60	Service Temperature : -65 to 180ºF
Volume Resistivity: 1 X 10(15) Ohm-cm	Specific Gravity: 1.1
Flash Point: 200°F	Dot Specifications:DOT: Combustible Liquids, NA1993 (More than 450 Lt)

Features and Benefits

Ethyl cyanoacrylate/aliphatic ester adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners.

LOCTITE® 425 is a dark blue ethyl cyanoacrylate/aliphatic ester adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners. It is designed for pre- or post-application. Fixture speed can be increased by using a LOCTITE cyanoacrylate activator – e.g. SF 7113. It is typically used in applications with an operating range of -65 °F to +185 °F (-54 °C to +85 °C).

Cures within 2 minutes on plated metal and plastics fasteners with full strength in 24 hours
Used for tamper proofing the heads of screws or potentiometers

Gọi: 039.831.9580