425 Assure is a fast curing, low strength cyanoacrylate adhesive; it has a low viscosity, can be applied either pre- or post-assembly; it can be used with an activator, but may reduce bond performance. 20 gram bottle.
Keo 425, keo dán 425, keo dán loctite 425, loctite 425
Typical Use:
| Used for locking plastic and metal fasteners; recommended for metal, nylon, polyester and many thermoplastic materials. | |
| Product Name: LOCTITE® 425™ Assure™ Instant Adhesive Surface Curing Threadlocker 20gr | |
| Color/Appearance:Blue | 1 Or 2 Part: 1,2 |
| Mix Ratio:Wipe On | Base Chemistry: Cyanoacrylate |
| Viscosity Cp: 60 | Service Temperature : -65 to 180ºF |
| Volume Resistivity: 1 X 10(15) Ohm-cm | Specific Gravity: 1.1 |
| Flash Point: 200°F | Dot Specifications:DOT: Combustible Liquids, NA1993 (More than 450 Lt) |
Features and Benefits
Ethyl cyanoacrylate/aliphatic ester adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners.
LOCTITE® 425 is a dark blue ethyl cyanoacrylate/aliphatic ester adhesive designed as a fast curing, low strength adhesive for locking metal and plastics fasteners. It is designed for pre- or post-application. Fixture speed can be increased by using a LOCTITE cyanoacrylate activator – e.g. SF 7113. It is typically used in applications with an operating range of -65 °F to +185 °F (-54 °C to +85 °C).
- Cures within 2 minutes on plated metal and plastics fasteners with full strength in 24 hours
- Used for tamper proofing the heads of screws or potentiometers
Gọi: 039.831.9580